Spaghetti Menders has designed a floating ground (Car frame and roll bars are not use for ground) battery cable system complete with 22 feet of red and black #1 gauge cable with all cable ends for complete car system and grounding both heads to main ground on motor. Includes shrink tubing, 2 firewall feed thru and cable hold downs with screws. (Master kill switch and starter solenoid are sold individually, not with kit) .

	Part #     FGBC-1 1 Battery Floating Ground System 22ft. 1 @ $218.00 FGBC-2 2 Battery Floating Ground System 28ft. 1 @ $248.00 BCS Battery Cable System Positive Only (Red) 1 @ $118.00 FGS Battery Cable System Negative Only (Black) 1 @ $98.00 Note: Battery cable also sold by the foot.
	Part #     BCCK Battery charger cable wiring system with #6 cable red and black 8 foot long with one way plugs, battery hookup ends and charger ends with shrink tubing and cable hold downs. 1 @ $68.00 Note: Plugs can not be plugged in backwards, So it cant damage your battery charger or an y system powered in the car at that time its plug in.
	Part #     47210-R 3/8" Feed through Junction Block (Red) 1 @ $16.00 47210-B 3/8" Feed Through Junction Block(Black) 1 @ $16.00 47211-R 3/8" Junction Block (Red) 1 @ $11.00 47211-B 3/8" Junction Block (Black) 1 @ $11.00
	Part #     KS2W Master Kill Switch with 2 Switching Terminals 1 @ $52.00 This kill switch is used for cars with a alternator it will remove power from battery and if you wire ignition thru the small terminals it will turn off the car with one switch. Now when you turn off switch the motor will shut off and not run on the alternater. NOTE: Alternater can't be wired to battery to make motor stop, (All power wires must be removed with kill switch) and only battery charger wires can hook to battery side of switch.