Race Car Wiring header image 2
Home of the Spaghetti Menders
 

ACCESSORIES

  RELAYS      

# MR101 20amp Relay with 1/4" power pins (use socket # RS290) 1 @ $4.00 10 @ $30.00
# BR301 30amp Relay with 1/4" power pins (use socket # RS281) 1 @ $4.50 10 @ $35.00
# BR401 40amp Relay with 1/4" power pins (use socket # RS281) 1 @ $5.00 10 @ $40.00
# PR701 70amp Relay with 3/8" power pins (use socket # RS283) 1 @ $20.00 10 @ $170.00
# PR751 75amp Relay with large screw terminals 1 @ $28.00 10 @ $240.00
RELAY SOCKETS FOR RELAYS ABOVE
  #RS290 Micro Relay Socket with 2-3/16" & 2-1/4" Pins 1 @ $1.50 5 @ $6.50
  #RS281 40amp Relay Socket with 5-1/4" Pins 1 @ $2.50 5 @ $11.00
  #RS283 70amp Relay Socket With 2-1/4" & 2-3/8" Pins 1 @ $4.00 5 @ $21.00

3 WIRED INPUT RELAY OUTPUT BOX $228.00
Using your switch or switch panel you can operate three fused outputs with 40amp relays. Feature diagnostic LED,s on all inputs and outputs. Wiring for main battery power input is supplied with system.

4 WIRED INPUT RELAY OUTPUT BOX $248.00

Using your switch or switch panel you can operate four fused outputs with 40amp relays. Feature diagnostic LED,s on all inputs and outputs. Wiring for main battery power input is supplied with system.


5 WIRED INPUT RELAY OUTPUT BOX $268.00

Using your switch or switch panel you can operate five fused outputs with 40amp relays. Feature diagnostic LED,s on all inputs and outputs. Wiring for main battery power input is supplied with system.


1-70amp and 2-40amp RELAY OUTPUT BOX $258.00

Using your switch or switch panel you can operate one 70amp relay and two 40amp relays with fused outputs. Feature diagnostic LED,s on all inputs and outputs. Wiring for main battery power input is supplied with system.

Tach And Dash Light Dimmers For 12 or 16 Volts
New Integrated Power Systems has designed a controller that can dim your tach light dash lights and gauges lights with a turn of a controller pot up or down. Unit will work with input voltages of 12v up to 22v and the output stays the same. All cables for input power the ground and output power are supplied. Units available with internal control pot or external control pot with 4ft cable. All units are internally fused and short out protected up to 2.5 amps.
Light Dimmer Internal Pot 5amp Part # LDI 25 $ 98.00
Light Dimmer External Pot 5amp Part # LDX 25 $118.00
       
New Integrated Power Systems has designed a controller that can dim your tach light dash lights and gauges lights with a turn of a controller pot up or down. Unit will work with input voltages of 12v up to 22v and the output stays the same. All cables for input power the ground and output power are supplied. Units available with internal control pot or external control pot with 4ft cable. All units are internally fused and short out protected up to 5 amps.
Light Dimmer Internal Pot 5amp Part # LDI 50 $128.00
Light Dimmer External Pot 5amp Part # LDX 50 $148.00

 

Contact us evenings at 815-963-1005 | fax 815-962-6876 | email as at info@racewiring.com
   
  ©2003 -2005 Spaghetti Menders Inc. All Rights Reserved
Fuse Cafe Internet Systems